Oxygen content variation and cation doping dependence of (La)1.4(Sr1-yCay)1.6Mn2O7 (y = 0, 0.25, 0.5) bilayered manganites properties

The results of the synthesis and characterization of the optimally doped (La)1.4(Sr1-yCay)1.6Mn2O7 solid solution with y=0, 0.25 and 0.5 are reported. By progressively replacing the Sr with the smaller Ca, while keeping fixed the hole-concentration due to the divalent dopant, the 'size effect' of the cation itself on the structural, transport and magnetic properties of the bilayered manganite has been analysed. Two different annealing treatments of the solid solution, in pure oxygen and in pure argon, allowed also to study the effect of the oxygen content variation. Structure and electronic properties of the samples have been investigated by means of X-ray powder diffraction and X-ray absorption spectroscopy measurements. Magnetoresistivity and static magnetization measurements have been carried out to complete the samples characterization. Oxygen annealing of the solid solution, that showed a limit for about y=0.5, induces an increase of the Mn average valence state and a transition of the crystal structure from tetragonal to orthorhombic while the argon annealing induces an oxygen under-stoichiometry and, in turn, a reduction of the Mn average valence state. Along with the Ca substitution, the Jahn-Teller distortion of the MnO6 octahedra is reduced. This has been directly connected to a general enhancement of the transport properties induced by the Ca-doping. For the same cation composition, oxygen over-stoichiometry leads to higher metal-insulator transition temperatures and lower resistivity values. Curie temperatures (TC) reduce by increasing the Ca-doping. The lower TC for all the annealed samples with respect to the 'as prepared' ones are connected to the strong influence on the magnetic interaction of the point defects due to the oxygen content variation.Comment: 49 pages, 13 figure

Local structural studies of Ba1−x_{1-x}Kx_xFe2_2As2_2 using atomic pair distribution function analysis

Systematic local structural studies of Ba$_{1-x}$K$_x$Fe$_2$As$_2$ system are undertaken at room temperature using atomic pair distribution function (PDF) analysis. The local structure of the Ba$_{1-x}$K$_x$Fe$_2$As$_2$ is found to be well described by the long-range structure extracted from the diffraction experiments, but with anisotropic atomic vibrations of the constituent atoms ($U_{11}$ = $U_{22} \ne U_{33}$). The crystal unit cell parameters, the FeAs$_4$ tetrahedral angle and the pnictogen height above the Fe-plane are seen to show systematic evolution with K doping, underlining the importance of the structural changes, in addition to the charge doping, in determining the properties of Ba$_{1-x}$K$_x$Fe$_2$As$_2$

Evidence of a pressure-induced metallization process in monoclinic VO2_2

Raman and combined trasmission and reflectivity mid infrared measurements have been carried out on monoclinic VO$_2$ at room temperature over the 0-19 GPa and 0-14 GPa pressure ranges, respectively. The pressure dependence obtained for both lattice dynamics and optical gap shows a remarkable stability of the system up to P*$\sim$10 GPa. Evidence of subtle modifications of V ion arrangements within the monoclinic lattice together with the onset of a metallization process via band gap filling are observed for P$>$P*. Differently from ambient pressure, where the VO$_2$ metal phase is found only in conjunction with the rutile structure above 340 K, a new room temperature metallic phase coupled to a monoclinic structure appears accessible in the high pressure regime, thus opening to new important queries on the physics of VO$_2$.Comment: 5 pages, 3 figure

A combined experimental and computational study of the pressure dependence of the vibrational spectrum of solid picene C_22H_14

We present high-quality optical data and density functional perturbation theory calculations for the vibrational spectrum of solid picene (C$_{22}$H$_{14}$) under pressure up to 8 GPa. First-principles calculations reproduce with a remarkable accuracy the pressure effects on both frequency and intensities of the phonon peaks experimentally observed . Through a detailed analysis of the phonon eigenvectors, We use the projection on molecular eigenmodes to unambiguously fit the experimental spectra, resolving complicated spectral structures, in a system with hundreds of phonon modes. With these projections, we can also quantify the loss of molecular character under pressure. Our results indicate that picene, despite a \sim 20 % compression of the unit cell, remains substantially a molecular solid up to 8 GPa, with phonon modes displaying a smooth and uniform hardening with pressure. The Grueneisen parameter of the 1380 cm^{-1} a_1 Raman peak ($\gamma_p=0.1$) is much lower than the effective value ($\gamma_d=0.8$) due to K doping. This is an indication that the phonon softening in K doped samples is mainly due to charge transfer and electron-phonon coupling.Comment: Replaced with final version (PRB

Interspecific aggression and food competition between the global invader Palaemon macrodactylus and the native Palaemon elegans

The impact of invasive alien species on native communities can act at different levels both by affecting the ecosystem’s structure (i.e., mainly in the case of vegetation) and through direct interactions (i.e., competition for food or space). Behavioral studies under controlled conditions can provide relevant information on both the invasive potential of alien species and the potential impact of the invaders on the local native species. In the laboratory, the competition for food resources between the invasive oriental shrimp Palaemon macrodactylus, Rathbun, 1902, and the Mediterranean native shrimp Palaemon elegans, Rathke, 1836, was analyzed. These species are typical residents of coastal transitional and estuarine waters, so the experiments were carried out using two salinity conditions that characterize the coastal lagoon of Venice. Although at both salinity treatments the alien species tended to be more aggressive than the native one, significant differences between the two species were mainly observed at a salinity of 30. In particular, at a salinity of 30, P. macrodactylus spent more time attending to the food source than the native species. The results are discussed in light of the potential inter-specific competition between the two species within the conditions of the Venice lagoon

Vibrational spectrum of solid picene (C_22H_14)

Recently, Mitsuhashi et al., have observed superconductivity with transition temperature up to 18 K in potassium doped picene (C22H14), a polycyclic aromatic hydrocarbon compound [Nature 464 (2010) 76]. Theoretical analysis indicate the importance of electron-phonon coupling in the superconducting mechanisms of these systems, with different emphasis on inter- and intra-molecular vibrations, depending on the approximations used. Here we present a combined experimental and ab-initio study of the Raman and infrared spectrum of undoped solid picene, which allows us to unanbiguously assign the vibrational modes. This combined study enables the identification of the modes which couple strongly to electrons and hence can play an important role in the superconducting properties of the doped samples

Thermal Performance Analysis of Triple Heat Exchangers via the Application of an Innovative Simplified Methodology

Despite the double tube heat exchangers, in the triple tube heat exchangers, there are three fluids, and the methodology based on the assessment of the logarithmic mean temperature difference is no longer applicable. Moreover, in triple tube heat exchangers, there are two overall heat transfer coefficients dependent on each other. As such, it is necessary to solve them simultaneously, thus making the evaluation of the thermal performance of triple tube heat exchangers more complex compared to double tube heat exchangers. Among the proposed approaches in the literature to solve this issue, one of the most powerful and commonly adopted in several engineering applications is the parameter estimation procedure. Nevertheless, for the specific implementation examined in our analysis, a thorough numerical model of the triple tube heat exchanger was required to apply the inverse procedure properly. Furthermore, it is mandatory to measure the temperature of the three fluids at the inlet and outlet sections. In so doing, the inverse procedure can be successfully applied to the characterisation of triple tube heat exchangers tested in well-equipped research labs; however, its application to heat transfer devices operating in industrial facilities can be difficult. In order to overcome this limitation, an innovative parameter estimation technique that enables the evaluation of the thermal performance of this type of heat transfer devices is presented. The suggested methodology is based on a simple model of the triple tube heat exchanger in which an equivalent double tube heat exchanger is considered, thus requiring only four temperature measurements. The results obtained by applying this simplified methodology are numerically validated and compared to those obtained using a comprehensive mode

Solid-state Nonlinear Optical Properties of Mononuclear Copper(II) Complexes with Chiral Tridentate and Tetradentate Schiff Base Ligands

Salen-type metal complexes have been actively studied for their nonlinear optical (NLO) properties, and push-pull compounds with charge asymmetry generated by electron releasing and withdrawing groups have shown promising results. As a continuation of our research in this field and aiming at solid-state features, herein we report on the synthesis of mononuclear copper(II) derivatives bearing either tridentate N2O Schiff bases L(a-c)- and pyridine as the forth ancillary ligand, [Cu(La-c)(py)](ClO4) (1a-c), or unsymmetrically-substituted push-pull tetradentate N2O2 Schiff base ligands, [Cu(5-A-5'-D-saldpen/chxn)] (2a-c), both derived from 5-substituted salicylaldehydes (sal) and the diamines (1R,2R)-1,2-diphenylethanediamine (dpen) and (1S,2S)-1,2-diaminocyclohexane (chxn). All compounds were characterized through elemental analysis, infrared and UV/visible spectroscopies, and mass spectrometry in order to guarantee their purity and assess their charge transfer properties. The structures of 1a-c were determined via single-crystal X-ray diffraction studies. The geometries of cations of 1a-c and of molecules 2a-c were optimized through DFT calculations. The solid-state NLO behavior was measured by the Kurtz-Perry powder technique @1.907 µm. All chiral derivatives possess non-zero quadratic electric susceptibility (χ(2)) and an efficiency of about 0.15-0.45 times that of standard urea